tandem switching meaning in Chinese
中继交换台
Examples
- On the one hand , we can use tandem switches in pairs and let them share traffic loads
一方面，将汇接交换机成对使用，利用汇接交换机本身进行负荷分担。 - Owing to the thick line bundle between tandem switches , 126 2 mbs trunk circuits are needed
由于汇接交换机之间的线束比较大，需要126条2mbits中继电路。 - In networking the four p3s tandem switches introduced recently , beijing telecom considered the following points
下面将对不同的应用情况下，分别采用两种速率的组网方式作以比较。 - The tandem switch is directly connected to 10 g transmission equipment via two 155 mbs coaxial cables , saving adm41 or adm161 equipment
汇接交换机直接与10g传输设备经过2条155mbits的同轴电缆进行连接，节省了adm41或adm161设备的使用。 - With the 2 mbits trunk , a full - capacity 128 k tandem switch needs 45 shelves while with the 155 mbits trunk , it only needs 21 shelves
一个128k的满容量的汇接交换机，如采用2mbits中继，需要４ ５个机架，采用155mbits中继，只需２ １个机架。